Skip to content
Al Quoz, Dubai Car repair and roadside help +971 50 608 7150
Classic cars · Al Quoz, Dubai

Classic Triumph Car Repair in Dubai

Keep your Triumph ready for its next drive. Discuss servicing, engine and cooling repairs, brakes, electrics, bodywork and interior repairs at our independent Al Quoz garage.

Whether your car runs regularly or has been parked for years, start with its model and the work you need. We assess the condition, explain the parts options and provide a written estimate.

  • Free initial visual assessment
  • Written quote before repairs
  • Pickup by arrangement
Green classic Triumph roadster
Care for the car you ownOriginal components, past repairs and conversions can affect the parts needed. We handle those checks during the assessment.
Start with the car

Your Triumph and the work

This page covers classic Triumph cars including TR roadsters, Spitfire, GT6, Stag and Triumph sedans. Contact us for routine care, a repair or a stored-car assessment. It concerns cars rather than modern Triumph motorcycles.

Servicing and returning to use

Oil, filters, fluid condition and maintenance checks for a running car. A stored car also needs its fuel, braking and starting systems assessed.

Mechanical and electrical repairs

Engine, cooling, clutch, gearbox, brakes, steering, suspension, battery, charging and wiring concerns.

Bodywork and interior care

Paint, panels, corrosion assessment, seats, carpets and trim. Wider restoration and specialist component work are confirmed after assessment.

Repairs across the classic Triumph range

TR roadsters

Configuration
Fuel systems and rear-suspension arrangements vary. A TR6 may have carburetors or Lucas mechanical injection, and an imported or modified car may differ from its original specification.
Parts matching
Engine or commission numbers can help match parts later. A model name and the service or concern are enough to start.

Spitfire and GT6 repairs

Generation matters
Identify the model and mark before ordering engine, suspension or brake parts. A similar-looking component is not enough to establish compatibility.
Parts matching
An available service record or a note about previous conversions can help identify suitable replacements. You do not need to identify every component before contacting us.

Stag

Cooling and driveline
The original Stag uses a 3.0-liter V8. Early and later cooling arrangements differ. Some surviving cars have replacement engines or modified cooling equipment.
Parts matching
An original V8 and a replacement engine can need different cooling parts. A photo or past repair record may help when the estimate is prepared.

Triumph sedans and smaller classics

Correct identification
Engine, body and running-gear components differ across these families. Service work follows the actual car rather than a generic Triumph parts list.
Parts matching
The model and year help identify the family. Engine-bay photos and restoration records are useful if available and can be supplied later.

TR7 and TR8 repairs

Fitted equipment
Identify the engine, gearbox and fuel equipment before planning repairs. Previous engine swaps, ignition changes and aftermarket air conditioning can change the job.
Parts matching
We check original or converted equipment before ordering. Photos of an unusual component can help with parts matching when needed.

Inquiries are welcome for another classic Triumph or a converted car. Tell us the model and the repair you want to discuss. We explain any specialist component work after assessment.

Plan the visit

A useful guide to repair costs

Compare the included work as well as the amount. A service, a local repair and rebuilding an assembly have different costs.

Oil and filter service

AED 200–600
Per car · general estimate including 5% VAT

AED 200–350 for many fills up to 5 liters, or AED 350–600 for higher capacity or specialist requirements. Oil, filter, labor and checks are included. The correct product and classic-engine suitability are confirmed.

Brake fluid service

AED 150–350
Per car · general estimate including 5% VAT

Specified fluid, replacement and bleeding. Leaking cylinders, damaged hoses and other hydraulic repairs are separate. Identify the fluid already used, particularly on a restored car.

Serviceable caliper repair

AED 400–1,000
One caliper · general estimate including 5% VAT

Suitable repair parts and labor, with bleeding where the circuit is opened. A damaged or incompatible caliper may need replacement. Rear drum-brake repairs are a different job.

One fabric seat panel

AED 390–440
One panel · general starting range including 5% VAT

A replacement fabric panel. Vinyl, leather, seat foam, frames and a complete retrim have separate quotations. Classic pattern matching and material availability can change the price.

These are our published general workshop estimates, not a fixed Triumph tariff. They describe specific jobs rather than the cost of a full restoration. Parts availability and the car’s existing modifications are checked before a written total is agreed.

The initial visual assessment is free. Our published targeted diagnostic-testing estimate is AED 150–350 including 5% VAT. Additional testing or dismantling is agreed separately. Most original classic Triumph systems need physical tests, not a modern computer scan.

Estimate a stored car in stages

A stored Triumph is assessed before a complete recommissioning total can be set. Start with the free visual assessment. Agreed targeted testing is guided at AED 150–350 including 5% VAT. The quote then separates a controlled restart, fuel and cooling repairs, brake and clutch hydraulics, tires and the checks needed before a road test.

An oil and filter service at AED 200–600 is one possible item, not a complete recommissioning package. One serviceable caliper repair at AED 400–1,000 is separate from other hydraulic components. Cooling hoses, pumps, ignition parts, machining and corrosion repairs are priced for the findings and fitted equipment.

Typical classic Triumph job estimates

These estimated repairs illustrate the stated work and assumptions. They are not completed customer jobs. Both totals include 5% VAT and the listed parts and labor.

1973 TR6 oil and filter service

Typical job estimate of AED 350–600

A compatible filter, suitable oil for the fitted classic engine, normal drain and refill work and final level and leak checks. This uses the higher-capacity service guide. An engine conversion or a different filter arrangement can change the product and access work.

The estimate does not include diagnosing low oil pressure, repairing a leak or replacing ignition and fuel-system parts. A running concern is assessed separately from routine oil maintenance.

1976 Spitfire front caliper repair

Typical job estimate of AED 400–1,000

One serviceable front caliper repaired with compatible parts, refitted and bled where the hydraulic circuit is opened. The correct existing fluid type must be established. The other caliper, brake pads and discs are inspected but replacement is additional.

A damaged bore, unsuitable casting or unavailable repair kit may make a correctly matched replacement more sensible. Final checks cover leakage, pedal operation and the original braking concern before handover.

Running or returning to use

What your service needs to include

Start with the car’s condition. A routine service has a defined list of items. A car that has stood unused needs staged checks before it is driven.

An agreed routine service

  • Oil and filterCorrect oil and a compatible filter for the fitted engine, with the fill quantity agreed.
  • Condition checksReview visible leaks, fluid condition, hoses, belts, brakes, tires and lighting for the agreed visit.
  • Separate repairsReplacement components, leak investigation and repairs are quoted separately from routine service items.

Use the handbook for the fitted engine. Time, storage and condition matter alongside mileage. An oil-pressure complaint needs investigation, not just fresh oil.

A stored car needs a restart plan

  1. Before startingAssess old fuel, leakage, battery connections and engine condition. Agree the checks needed for a controlled restart.
  2. Before movingInspect brake operation, stuck components, clutch hydraulics, tires and visible deterioration.
  3. Before a road testComplete the agreed repairs and safety checks. A successful start does not prove that the car is road-ready.

Tell us how long the car has stood and when it last ran. A stored-car assessment is broader than an oil service.

Compare the included work in our oil and filter service before choosing a visit. Regular maintenance and returning a car from storage are separate quotations.
From symptom to repair

Engine checks and repair choices

Starting trouble, temperature changes and oil concerns need different checks. The diagnosis determines whether a local repair or internal engine work is appropriate.

Open engine bay of a classic six-cylinder roadster
Fuel, ignition and cooling checks follow the equipment actually fitted.

Starting and running faults

First checks
Ignition, fuel supply, air leaks and engine condition. Points, electronic ignition and replacement carburetors alter the checks.
Repair choice
A tune-up or local component repair is different from internal engine work. Choose the repair after the fault is established.
Useful detail
Does it happen cold, warm or under load? Mention fuel-system and ignition changes.

Cooling repairs

First checks
Radiator, hoses, thermostat, water pump and the fitted fan arrangement. Identify the specification of an original-engine Stag.
Repair choice
A hose or radiator repair is different from cylinder-head work. Investigate the cause and extent before agreeing the job.
Useful detail
Explain when the temperature rises, coolant loss and any cooling-system modifications.

Leaks and internal engine concerns

First checks
External seals, ventilation, oil supply and evidence of internal wear. A visible leak does not establish the cause of smoke.
Repair choice
Local leak repair, cylinder-head work and rebuilding are separate quotations. Any specialist machining or internal work is identified in the estimate.
Useful detail
Tell us where the leak appears, when smoke occurs and what the pressure gauge shows.

Carburetors fitted

Identify the carburetors and ignition setup. Mixture, balance, fuel supply and wear are assessed together. Mixture adjustment cannot resolve every running fault.

Lucas PI fitted

TR5 and some TR6 specifications use Lucas mechanical injection. Pump, metering-unit and injector faults need different tests from carburetor faults. A specialist repair or exchange component can be discussed when the diagnosis supports it.

Fuel leaking or engine overheating?

Stop safely, switch off and call before driving further. Do not attempt a roadside fuel-system repair or open a hot cooling system.

Call 050 608 7150
Match the fitted transmission

Manual, overdrive or automatic

Compare like-for-like work before approving a repair. A clutch fault, an overdrive control problem and an internal gearbox rebuild are different jobs.

Compare the workManual gearboxManual with overdriveAutomatic gearbox
What you noticeDifficult gear changes, slipping, noise or leakage.Overdrive fails to engage, drops out or works intermittently.Delayed engagement, poor shifts, noise or leakage.
First checksClutch hydraulics, release operation, linkage, leaks and gearbox condition.Identify the overdrive unit. Check its controls, wiring and oil condition.Identify the fitted transmission. Assess fluid condition, leaks, controls and operation.
Repair optionsA hydraulic repair differs from clutch removal or a gearbox rebuild.An external control fault differs from internal overdrive work. Specialist repair may be needed.A local leak or control repair differs from internal rebuilding. Confirm the repair arrangements.
Useful follow-up detailsDescribe the change. Gearbox identification can be supplied later.When overdrive fails. Unit details help if available.Whether the complaint occurs cold, warm or under load.
Rear noise or driveline vibration
Differential, wheel-bearing and propshaft concerns need their own checks. A gearbox repair is not an automatic answer to every driveline noise.
Confidence on the road

Match the brake and steering repair

Find the concern that describes your car. The checks and quotation should name the actual system and components involved.

Pedal, fluid or hydraulic fault

What is assessedHoses, cylinders, calipers, the master cylinder and fluid leakage. Identify the fluid already used on a restored car.

What changes the quoteA fluid service is separate from repairing a leak or replacing a damaged component.

Friction parts or uneven braking

What is assessedFitted discs, pads, drums and shoes, together with wheel condition and operation.

What changes the quoteFront-disc repair and rear-drum work use different parts. Agree which axle or components are included.

Steering, ride or tire concern

What is assessedPlay, bushes, joints, springs, dampers, wheel bearings and tire condition, age and specification.

What changes the quoteModel, suspension conversions and wire wheels affect compatibility. Repair worn parts before finishing with alignment.

Unsafe braking needs transport

If the pedal sinks, a wheel is smoking or fluid is leaking, do not drive the car to test it. Call to discuss safe transport.

Call 050 608 7150
Test the fitted circuit

Classic electrics and cabin comfort

Battery, charging, ignition and wiring checks follow the car’s actual equipment and previous changes. Describe what stopped working and when it happens.

Battery, starter and charging faults

A flat battery can reflect its condition, charging performance, poor connections or a parked drain. We assess the complaint before choosing a battery, starter or alternator repair. Mention generator-to-alternator conversions and changes to electrical polarity.

Ignition, lights and instruments

Distributor components, ignition coils, ground connections, wiring and switches can affect running or lighting. A modern scanner is not a substitute for checking an original classic circuit. An electronic-ignition conversion needs its own component identification.

Old wiring or added accessories

Previous repairs, alarms, stereos and auxiliary fans can leave poorly connected wiring. Explain which items were added and when the fault began. Loom replacement or larger rewiring is assessed and quoted separately.

Heating and fitted air conditioning

Tell us whether the car has original ventilation or added AC. Heater leaks, blower problems and an AC cooling fault are separate repairs. Refrigerant, compressor and fitted components are identified before quoting.

Preserve what can be saved

Paint, corrosion and larger bodywork projects

The condition of the metal decides the starting point. Find the repair level that fits your car before choosing the finish.

  1. Sound metal, worn finish

    Paint is tired or there is local panel damage.

    Compare local finishing work

    Panel repair, preparation, color matching and refinishing. Existing paint affects the finish that can be achieved.

  2. Rust or old repairs

    Corrosion is visible, or past work needs checking.

    Assess metal before paint

    Inspect sills, floors, arches, mounting areas and relevant chassis sections. Paint or undercoating cannot replace weakened metal.

  3. Structural or extensive damage

    The project may involve dismantling or major metal work.

    Confirm the restoration plan

    Agree the intended result, fabrication and repair arrangements before committing to a wider project.

Red Triumph Stag convertible
Keep the model’s characterA Stag’s roof, body and trim needs differ from a TR roadster. Agree the areas, parts and finish included in a wider restoration.
For accident or insurance work, share damage documents and the insurer’s requirements. Cover, excess and repair authorization come from the insurer. An estimate does not guarantee approval.
Make the cabin usable

Seats, carpets and interior repairs

A damaged panel, worn foam, leaking hood or complete retrim needs a different estimate. Tell us the area you want repaired and the finish you prefer.

Interior work to discuss

  • Seat covers and local panel repairs
  • Foam, seat frames and door trim
  • Carpets and damp underlay
  • Hood material, seals and water entry
  • A wider retrim with matched material and stitching

A local cover repair may preserve sound original material. Foam, frames, moisture beneath carpets and a complete retrim are separate work. Agree vinyl, fabric or leather, color, grain and stitching before starting.

Compare our seat and upholstery repair options for a panel repair or retrimming. Reproduction trim and hood or seal inquiries need the exact model.
Black pleated seats and wood dashboard in a classic roadster
Choose the actual worn area rather than assuming the whole interior needs replacing.
Plan the complete job

What to check in your quotation

Use the included work and parts choices to compare a local repair with a wider project. Agree what to preserve and what to replace.

What the quotation should show

Parts
Suitable new, reproduction, reconditioned or repairable original components, where available.
Included work
Named repairs, labor, fluids and any outside specialist work.
Separate checks
Testing or dismantling that needs agreement beyond the initial visual assessment.
Timing and terms
Parts lead time, workshop arrangements and applicable warranty terms for the actual parts and work.

Where your approval matters

  • Before repairs beginIdentify the fitted components and agree the work, parts choices and written total.
  • If more damage is foundExtra work is explained and priced before proceeding. Initial inspection cannot reveal every concealed defect.
  • Before collectionThe agreed repair is rechecked. Remaining concerns and any further work are explained.

Parts and completion time

Imported parts, exchange units, core returns and machining can affect completion. A routine service and a rebuild have different booking needs. Rimmer Bros’ TR6 identification guidance explains why component numbers matter when ordering.

Getting the car to Al Quoz

Visit 39, Al Quoz Industrial Area 4, Dubai. Pickup and drop-off can be arranged depending on location and availability. Mention whether the car starts, rolls and brakes, plus low clearance or long storage, so suitable transport can be discussed.

Preserve a sound original part

An original component may be worth repairing when its condition supports the work and suitable repair parts exist. Reproduction parts can be useful for unavailable or unsafe originals. An exchange or reconditioned assembly needs its condition, compatibility and coverage stated. Cosmetic originality should not override safe brakes, steering or fuel containment.

Supply and outside work

The estimate explains freight, any exchange-core deposit, machining and specialist charges when applicable. An exchange deposit can depend on the condition and return of the original unit. Supplier stock and overseas delivery affect timing. Agree whether the car can be collected while a part is sourced or must remain at the workshop.

Checks after the agreed repair

Cooling work needs leak and temperature checks. Fuel and ignition repairs need the starting or running concern reassessed. Brake and clutch work needs hydraulic operation and leakage checked. Wiring work needs the affected circuit retested. Corrosion repairs and trim work need the agreed finish, fit and disturbed functions reviewed.

A controlled road test follows the appropriate safety checks. Keep the invoice, fitted-part details and any remaining findings. A stored car may need further staged work even after its engine starts and the first repair is complete.

Classic Triumph questions

Questions from Triumph owners

Call with your model and the work you need. An engine-bay photo and a short description of the symptoms are useful when discussing a classic car.

Are you an authorized Triumph workshop?

My Car Repair Dubai is an independent, multi-brand garage operated by AMF AUTO SERVICES LLC. This page concerns classic Triumph cars. It does not imply manufacturer authorization or factory support for every specialist component.

Can you inspect a Triumph before I buy it?

Arrange a classic-car pre-purchase inspection covering the agreed accessible structure, corrosion, engine, transmission, brakes and electrics. Previous modifications are also considered. Hidden panels and internal assemblies may need separately agreed dismantling. The report describes findings rather than guaranteeing future reliability.

Does the free check include dismantling?

No. The free initial visual assessment is separate from agreed diagnostic testing, compression checks, dismantling or a detailed restoration assessment. We explain the required checks and any charge before starting.

Can you work on a modified Triumph?

Yes, contact us about your modified Triumph. Engine swaps, electronic ignition and changed brakes or suspension affect replacement parts. We inspect the fitted equipment and explain suitable repairs or any specialist support. Technical records and photos can be supplied later if available.

How often does a classic Triumph need servicing?

Follow the handbook for the fitted engine and use a plan that reflects mileage, time, storage and condition. Avoid applying one modern-car mileage interval to every classic. Tell us when the fluids and filters were last changed and how you use the car.

Classic Triumph inquiries

Tell us about your Triumph

Call or WhatsApp your Triumph model and the work you need. Mention whether it runs or has been in storage. We will help arrange the assessment. Technical details and photographs are optional follow-up information.

My Car Repair Dubai is operated by AMF Auto Services LLC at Warehouse 39, Al Quoz Industrial Area 4, Dubai. View the workshop contact details.

Photos of the car, fitted engine and affected area help with the discussion. The assessment, parts availability and quotation are confirmed before you approve work.

Scroll to Top