Targeted repair
Choose this when testing identifies a repairable fault and the surrounding assembly remains serviceable. Ask how the original symptom will be checked afterward.
Service due, warm AC, a brake concern or a gearbox fault? Our Al Quoz workshop handles Lamborghini maintenance and mechanical repairs, with model-specific checks, practical parts choices and a written fitted estimate before you approve the work.
Oil and filter service estimated at AED 1,750 to 3,250 including 5% VAT. Tell us the model and problem first. We confirm the supported work and any test charge before your visit.

Estimated fitted totals in AED include 5% VAT. Model, fitted equipment, parts and access affect the final figure. These are planning prices rather than a fixed offer for an unseen vehicle.
Engine and cooling The failed component, access, internal damage and whether engine removal is needed determine the fitted total. Compare a targeted repair with rebuild or replacement only after the condition is known.
Gearbox and clutch Confirm the gearbox design, clutch or control fault, removal labor, fluids, setup and final testing. A used or reconditioned assembly needs a verified code, supplier and written warranty.
AC and suspension The estimate names the leaking or failed component and its quantity. Refrigerant, alignment or calibration is included only when stated. A recharge or alignment alone will not fix a failed component.
Share your model and the concern for a repair estimate. VIN or part details can follow when fitment needs confirmation.
We separate parts, labor, VAT and additional work so you can compare the same job. Send your model and the repair or symptom you want priced.
Loss of power, an oil leak or a difficult shift does not identify one failed part. We explain the finding and the available repair before you commit to a major assembly.
A confirmed ignition, wiring, seal or cooling fault may need a targeted repair. Internal wear or damage needs a different decision, with any removal or dismantling charge agreed before the engine is opened.
A rebuild should list the damaged items and replacement work. A replacement engine must match the vehicle and include its source, condition, fitting, setup and warranty. The cheapest assembly price is not necessarily the lowest fitted total.
A Gallardo clutch concern, a Huracán shift complaint and an Urus automatic gearbox problem need different tests and parts. We check the exact unit before comparing clutch work, a control repair, an internal repair or a compatible replacement.
When the gearbox works normally and maintenance is due, the correct fluid service is a separate job. Changing oil cannot restore damaged internal parts. Severe slipping, loss of drive or a major fluid leak needs a safe-arrival plan.

Choose this when testing identifies a repairable fault and the surrounding assembly remains serviceable. Ask how the original symptom will be checked afterward.
Consider this when internal condition supports repair. Agree inspection charges, replacement items and what happens if further damage changes the estimate.
Compare this when repair is impractical or parts are unavailable. Check compatibility, condition, supplier warranty and the complete installed price.
Explore our engine repair and rebuild options or gearbox repair and replacement choices. General workshop prices on those services are not fixed Lamborghini quotes.
Pads, discs and hydraulics are separate decisions. We identify the brake hardware and assess the relevant axle before recommending what to replace.

Suitable when disc condition, measured limits and contact surfaces support retaining the discs. The estimate identifies pad specification, fitting and any wear sensor or hardware required.
Required when the disc is outside the applicable limit or otherwise unserviceable. Steel and carbon ceramic systems use different assessment and replacement criteria. They must not share one assumed set price.
A sticking caliper, leak or soft pedal can require work beyond friction parts. The quote lists the confirmed fault, repair parts, fluid work and final checks.
Stop safely if braking is severely reduced, the pedal becomes soft or fluid is leaking. Call to discuss recovery. Do not drive the car in to save a transport charge.
Warm cabin air, overheating and an unsettled ride need different repairs. We keep the work and costs separate on the estimate.
Check airflow, AC controls and the refrigerant circuit as agreed. A proven leak, compressor or heat-exchanger fault needs the appropriate repair before the system is serviced and tested.
Coolant loss, fan operation and circulation need their own checks. Serious overheating or an oil pressure warning requires stopping safely and arranging suitable recovery.
Check joints, bushings, dampers, mounts and the fitted lift or air system. One worn item does not automatically justify replacing a complete set.
Confirm whether alignment, setup or calibration follows the repair. A lift fault needs its supported procedure and parts identified before work begins.

Match the tire size, load and speed specification, axle fitment and wheel clearance to the exact car. Check looseness, tire damage and wheel condition before treating an alignment as the complete repair.
For a low sports car, lifting and transport must suit the clearance and vehicle procedure. Tell us about a front lift problem, modifications or an undrivable condition before arrival.
Body and glass work can also be assessed. The estimate identifies panel or glass specification, sensors, paint area and any additional calibration rather than quoting from the badge alone.
Share the model, warning or symptom. We will help you plan the relevant repair assessment and a safe visit.
The VIN and fitted equipment matter more than the badge alone. Model information helps us confirm support and choose the correct maintenance, parts and testing.
Identify the exact engine, gearbox, brake material and suspension equipment. On an Urus SE, a routine tire or visual job is different from work near high voltage components.
We confirm hybrid task support, equipment and safe access before accepting the requested work. A general repair offer is not a promise to complete every hybrid procedure.
Brake hardware, transmission complaints, tire fitment and service requirements depend on the version. Bring the latest service invoice and describe when the fault occurs.
Low clearance, transmission design, age and previous repairs can affect access and parts. We inspect what is fitted before planning clutch, chassis or engine work.
Confirm the exact requested job before visiting. Electrified systems require the relevant procedure and verified task support. Check active manufacturer coverage before paying for a covered concern.
My Car Repair Dubai is an independent multi-brand garage in Al Quoz. Our technicians use inspection, compatible scanning and physical checks to confirm the cause before recommending parts.
Compare genuine or suitable named alternatives when available. A used or reconditioned assembly needs its code, source, condition and warranty stated separately.
Your estimate identifies the parts, fitting, consumables, VAT and applicable warranty. We obtain approval before a parts order or additional work changes the bill.
After the approved work, we recheck the leak, fault, operation or road symptom as appropriate and record what was completed and what remains.
Warehouse 39, Al Quoz, Dubai. Call before arrival to confirm the work and visit time. Pickup and drop-off can be arranged depending on location and availability. We confirm the vehicle, collection method and any charge when booking.
For an active warranty or campaign, check coverage with the responsible distributor before authorizing an independent repair. Use Lamborghini’s VIN recall check for manufacturer campaign information.
Oil and filter service is estimated at AED 1,750 to 3,250 including 5% VAT. The brake planning budget is AED 3,500 to 12,000 or more, with axle and material confirmed in the quote. Engine, gearbox, AC and suspension repairs need the failed component, parts and access identified before a dependable fitted total can be given.
Start with the model and problem. Year, mileage, a warning photo or recent invoice can help. We may ask for the VIN or part details when exact fitment needs confirmation. You do not need to diagnose the failed part before contacting us.
The initial accessible visual assessment is free. A compatible scan and agreed first checks are AED 150 to 350 including VAT. Extended testing, pressure checks or dismantling are separately agreed when required. A test charge is not the price of the repair.
A targeted control, clutch or component repair may be suitable if the findings support it. Internal damage can require repair after dismantling or a compatible replacement. We explain the gearbox-specific choices and agree any removal or internal inspection charge first.
No. The fitted disc material, axle, measured condition and required parts determine the estimate. A broad brake budget is not a promise to supply carbon ceramic discs at a steel brake price.
Tell us the exact model and requested work. Tires, routine visual checks and work near high voltage components have different requirements. We confirm equipment, access and support for that particular task before booking it.
Where available, we can compare genuine parts with suitable named alternatives. The estimate confirms fitment, supplier, lead time and the applicable warranty. Used or reconditioned assemblies need separate condition and warranty information.
Stop safely and do not continue with an oil pressure warning, serious overheating, major fluid loss or severe brake concern. Call to discuss suitable recovery and avoid causing further damage.
We confirm the visit and expected handover after identifying the model, due work and parts availability. Separate the workshop time from any part-delivery wait. Major repairs need a time estimate for the approved work, with updates if the findings change.
The written estimate and invoice state the warranty applicable to the chosen part and repair. Manufacturer coverage is a separate matter to check with the distributor. Pickup and drop-off depend on the vehicle, location and availability, with any charge agreed before collection.
Tell us your model and what needs attention. We will confirm the supported work, explain your repair and parts choices, and give you a written fitted estimate before you approve the repair.
Visit our workshop at Warehouse 39, Al Quoz, Dubai. Ask about pickup and drop-off availability when you contact us.