Book your Acura’s scheduled maintenance or bring us a new repair concern. My Car Repair Dubai uses the Maintenance Minder information and the records you have to plan the service. For an imported car, its model year and market specification guide the parts choice.
Free initial inspection and fault-code scan. Send your model and what needs attention.
An MDX Type S brake repair and a manual Integra clutch replacement call for their own parts and labour estimate. We cover routine maintenance and mechanical repairs alongside AC, electrical, body and cabin work, with specialist applications confirmed before booking.
For an import, the original market and any previous repairs help us identify the correct parts. An old invoice or the service book can be useful even when the history is incomplete.
MDX and MDX Type S. Petrol servicing, engine and gearbox repairs, brakes and chassis work. The 2025 3.5-litre MDX and 3.0-litre turbo Type S have different requirements; the Type S brings air suspension and Brembo front brakes.
RDX. Engine, cooling, transmission, suspension and AC repairs. The move from the 2018 V6 to the 2019-on 2.0-litre turbo changed the timing drive and gearbox. Drivetrain and damper equipment also depend on the version.
TLX and TLX Type S. A first-generation 2.4-litre TLX has an eight-speed dual-clutch transmission; the 3.5-litre V6 has a nine-speed automatic. Later cars receive a parts match for their own engine, gearbox and brakes.
TL, TSX, TSX wagon, RL and RLX. Arrange maintenance, leak and cooling repairs, chassis work, electrics or cabin repairs. Parts supply and the condition of older components help determine what is practical to repair.
The 2016 ILX pairs its 2.4-litre engine with an eight-speed dual-clutch gearbox. Modern Integras may have a CVT or manual, while the 2024 Type S is manual. These differences carry through to fluid servicing, clutch repairs and the performance brake parts in the quotation.
For an ADX, petrol-era ZDX, electric ZDX or NSX, send the year and required repair before arranging a visit. We confirm acceptance and any specialist access or parts requirements for that particular job.
Hybrid and electric vehicles. Please identify an MDX or RLX Sport Hybrid, ILX Hybrid, hybrid NSX or electric ZDX when enquiring. High-voltage battery, inverter, motor and charging repairs require a separate capability check. Petrol engine servicing applies only where a combustion engine is fitted.
Use these figures to plan a defined job, then ask for the fitted price for your Acura.
| Work and price basis | AED and VAT | What is covered |
|---|---|---|
| Oil and filter service Dubai market starting price | From AED 359 Including 5% VAT | Oil, a standard new oil filter and service labour for one petrol vehicle. The specified oil, quantity and filter for your Acura can change the total. |
| 12-volt battery replacement Market fitted range | AED 250–700 Including 5% VAT | One conventional starter battery, fitting, a battery check and disposal. This published most-cars range can be exceeded by start-stop or premium batteries. High-voltage batteries are excluded. |
| Timing belt or chain replacement Published general workshop estimate | AED 1,450–4,400 Including 5% VAT | The applicable belt or chain kit, tensioning parts, fitting and timing. Water-pump replacement and additional work are identified separately. Belt-driven V6 and chain-driven four-cylinder jobs require their own quotation. |
| Targeted gearbox component repair Published general workshop estimate | AED 1,500–4,500 Excluding 5% VAT | Ordinary parts and labour for a repairable component fault, such as a seal, solenoid or valve body. Diagnosis, removal, fluid, cooler or coding work must be itemised. Complex DCT and CVT repairs can exceed the range. |
Market sources checked 1 October 2026 are QARO’s Dubai oil service and 800Battery’s Acura page. Our engine repair guide and transmission repair guide supply the general workshop estimates, with their original VAT treatment shown above.
Keep the service-code photograph and previous invoices together when planning the visit.
On an Acura equipped with Maintenance Minder, the oil-life display and service codes help explain what is due. The code may bring filters, transmission fluid, spark plugs, coolant or differential fluid into the visit alongside engine oil. Send a photograph of the display and we can discuss the job before you travel.
We use the car’s model-specific maintenance information with its service history to build the work list. Oil and filter replacement can be combined with fluid and filter changes that are due, plus checks for leaks, brake wear and other items needing attention. The invoice should make the completed work clear before the reminder is reset.
On a belt-equipped engine, age and mileage guide replacement. The belt and tensioning parts belong in the estimate, with water-pump work considered for the relevant application. Engine identification is essential here. The 2015 TLX 3.5-litre V6 uses a belt, while its 2.4-litre four-cylinder uses a chain.
For a recently imported car, check whether the odometer reads miles or kilometres and bring the overseas records you have. Those details help separate documented maintenance from jobs still due, without starting again with a blanket replacement package.
A shift hesitation, a fluid leak and a worn manual clutch each lead to a different repair. Identifying the gearbox gives the enquiry a useful starting point.
First-generation TLX four-cylinder and V6 cars use different gearboxes, and a later RDX has a ten-speed automatic. Fluid, filter and sealing parts follow the fitted unit. Slipping, delayed engagement or rough changes may require a component repair, overhaul or replacement after the fault has been established.
A rebuild quotation should identify the worn internal parts and the work around the gearbox. A replacement needs its identification, condition and supplied accessories checked before it can be compared fairly.
A CVT Integra needs the specified CVT fluid and a transmission-specific assessment. On a manual, clutch slip or difficult selection brings the clutch, release mechanism and gearbox into consideration.
Flywheel wear or an oil leak may become relevant during clutch work. Keep those items separate in the estimate so the price describes the actual repair, rather than a clutch disc alone.
On applicable petrol SH-AWD cars, rear differential fluid is a separate maintenance item from transmission fluid. Turning noise or driveline vibration can also come from tyres, mounts, joints or driveshafts, so the road symptoms help direct the inspection.
Sport Hybrid hardware changes the picture. The 2017 MDX Sport Hybrid combines a seven-speed dual-clutch transmission with electric drive components. Tell us the powertrain at booking so specialist work can be considered before the car arrives.
A new leak, rough idle or loss of power deserves its own investigation, even when routine maintenance is up to date.
Engine repairs can include gaskets and seals, ignition components, fuel-system parts, sensors and wiring. On turbocharged RDX and Type S versions, the intake, boost controls and oil supply add further possible causes of poor running. A leaking connection or control fault may be repairable without replacing the turbocharger.
Coolant loss brings the radiator, hoses, thermostat, water pump and fans into the investigation. Repairing the leaking or failed component, filling with the specified coolant and checking operating temperature gives the job a clear endpoint. Stop safely and arrange assistance if the engine overheats, loses coolant rapidly or shows an oil-pressure warning.
Where testing establishes low compression or internal damage, we can discuss cylinder-head repair, rebuilding or a compatible replacement engine. Machining, internal parts, removal and fitting should be clear in the comparison. Exhaust leaks and emissions warnings are also repairable concerns; if a catalyst has been damaged by a misfire or oil burning, the engine fault needs attention alongside it.
Braking, ride quality and cabin faults are often the things you notice every day. They can be planned into the same workshop visit.
We repair worn pads and discs, caliper concerns and brake-fluid problems, with the axle and supplied parts identified in the quotation. Disc condition determines whether a new pad set can be fitted on its own. A 2024 Integra Type S or 2025 MDX Type S has Brembo front brakes, so its parts price should reflect that equipment.
Suspension work can involve dampers, bushes, ball joints, mounts or wheel bearings. Adaptive dampers and MDX Type S air suspension require the corresponding parts and any specialist setup to be confirmed. Steering play or noise is investigated with the surrounding chassis. P-AWS rear-steering equipment on applicable TLX versions also needs the relevant diagnostic and setup access.
Tyre condition, wheel damage and alignment belong in that assessment too. Balancing addresses wheel-and-tyre imbalance; alignment follows correction of worn or damaged parts. Tell us about spacers, changed wheel sizes or modified suspension, especially on an AWD car.
For an AC complaint, describe both the airflow and the temperature. Weak delivery can involve the cabin filter, blower or distribution controls; air that blows strongly but stays warm directs attention towards the refrigeration circuit. Leak repair, replacement of a failed component and charging to the specified quantity address the job at its source.
Starting and battery problems begin with the low-voltage battery, connections and charging circuit. Repeated discharge can require a current-draw investigation, particularly where accessories have been added. The replacement battery’s fitment and technology need to suit the car.
Window, lighting, sensor and wiring faults can be handled alongside the mechanical work. Required key, security, software or calibration access is confirmed for the specific repair before a programming commitment is made.
Damaged bumpers, panels, paint and glass can be assessed for repair or replacement. Imported headlights, glass and trim need a market-specific match, and concealed damage or broken mounts may add work once the outer part is removed.
For camera, radar or restraint equipment, establish the required repair and calibration arrangements before the body or glass job begins. Those operations form part of planning the repair rather than an assumption attached to the replacement part.
Worn bolsters, seams, roof lining and trim can be considered for local repair or retrimming. A photograph helps us discuss seat and upholstery repairs, including the materials needed around heating, ventilation and safety features. Any water entry should be addressed before a damaged interior finish is replaced.
Your model, year and a short description are enough to begin. For an imported Acura, the VIN and original market become useful when matching mechanical parts, glass, lights and electronics. Shared Honda origins alone do not establish interchangeability.
We discuss the available genuine or suitable alternative parts and identify what will be supplied. If a major assembly is rebuilt or used, its condition, included accessories and applicable terms belong in the estimate. Overseas availability can affect the completion date as much as workshop time, so both are considered when arranging the visit.
Additional findings are raised before further work proceeds. At collection, keep the itemised invoice with your service records and review the checks completed, applicable parts and labour terms, and any follow-up or bedding-in advice.
Send your model and year, then tell us about the service reminder or repair. We will help arrange the visit and explain the parts and work to expect.
AMF Auto Services LLC · 39, Al Quoz Industrial Area 4, Dubai.
