A service due, warning message or change in how your McLaren drives? Speak to our Al Quoz team about maintenance, mechanical repairs, AC, electrical faults or bodywork. We confirm the supported work and fitted quotation before you approve it.
Tell us the model, year and concern. Initial investigation and additional work are agreed before repairs start.
A routine service and a clutch, carbon-ceramic brake or hybrid fault have different costs. We quote the fitted job, rather than advertise one repair price for the entire range.
| Work | Cost guidance | Inclusions to confirm |
|---|---|---|
| Agreed initial diagnostic checks | AED 150–350 general guide | For supported scanning and initial fault checks agreed with the team. Extended investigation and manufacturer-only functions are separate. Confirm McLaren access before booking. |
| Scheduled service or oil service | Quote for model and due work | Specified oil, correct quantity, compatible filter and agreed inspections. Spark plugs, air filters, brake fluid and gearbox service are separate unless listed. |
| Brake pads and discs | Quote after brake specification | Confirm steel or carbon-ceramic equipment, pad compatibility and measured condition. The fitted quote identifies the axle, sensors and any caliper work. |
| Gearbox, clutch or suspension repair | Quote after assessment | Identify the failed system and compare component repair with major work. Include removal, fitting, fluids, required setup and final checks. |
| Engine, hybrid or structural work | Confirm supported repair first | Parts access, procedures and specialist or manufacturer involvement determine what can be accepted and quoted. |
For a Dubai comparison, Golden Horse’s published McLaren service guide starts standard servicing at AED 3,000 before VAT, equal to AED 3,150 including VAT. This is another workshop’s advertised starting price, not our offer or a complete repair estimate. Our written quote is matched to your car and agreed work.
The diagnostic guide above includes 5% VAT. Your repair quotation states the complete payable total, parts choice, investigation already agreed and exclusions. Do not apply ordinary-car brake or oil-service prices to a McLaren without confirming fitment.
Start with your model and concern. You do not need to identify the failed component before calling.
Equipment that changes the workConfirm brake equipment, fitted dampers, lift system and body style. Previous upgrades can change compatibility.
Details to provideModel year, Coupe or Spider, warning message and recent work.
Equipment that changes the workSuspension and hydraulic equipment differ by generation. Brake specification and lift-system parts need the actual vehicle identified.
Details to provideModel, year, fitted options and whether a ride-height or handling concern changes with driving mode.
Equipment that changes the workTouring bodywork, cabin equipment and fitted chassis components need the correct parts and procedures.
Details to provideYear, concern, service records and any changes from original specification.
Equipment that changes the workArtura hybrid work is different from a V8 repair. P1, Senna, Speedtail and track cars need the requested work and specialist access confirmed individually.
Details to provideExact model, original market and road or track specification. We confirm suitability before accepting the job.
The VIN may be needed for parts matching, original-market differences or campaign eligibility. A model enquiry is not a promise that every software, hybrid or structural procedure is available in-house.
Describe the symptom and conditions. A stored code or warning alone does not establish that the engine needs rebuilding.
Record the warning and when power changes. Supported fault checks can distinguish ignition, fuel, air or boost-control concerns before a component is quoted.
Compare an external leak with internal oil use. Turbocharger, exhaust or engine work follows the findings. Ask for the cause, required access and fitted cost before major dismantling.
Check the affected cooling circuit, visible leaks, hoses, heat exchangers and fan operation. Repeated overheating needs assessment before a flush or replacement part is agreed.
Stop safely for overheating, an oil-pressure warning or severe knocking. Do not open a hot coolant cap. A model-specific repair quotation identifies parts, fitting, fluids and the checks on the original complaint.
Choose the concern below. Maintenance, an intermittent shift complaint and loss of drive require different work.
Transmission type, software access and fitted equipment must be confirmed for the model. Ask whether the proposed quote covers the clutch, control system or complete gearbox, rather than comparing totals for different jobs.
An oil change and a scheduled service are different bookings. We list the inspections and replacements included so you can compare the quotation.
Use the schedule for your model, year and use, and bring previous invoices. Track use or a long period parked can change the assessment needed. Due spark plugs and filters are quoted, not automatically added from a generic mileage package. The invoice records completed work and remaining recommendations. For a service-focused enquiry, compare the McLaren servicing options with the work due on your car.
Identify the brake and chassis equipment first. The same noise can lead to different work on different models.
Measure wear and assess damage before deciding on pads alone or pads with discs. Include suitable parts for the affected axle and check uneven wear.
Use the applicable manufacturer condition limits and compatible pads. These are not assessed or quoted as ordinary steel discs. Confirm the inspection procedure and required parts before approving replacement.
Check the related hardware, calipers, tyres and wheel condition. A warning light or vibration does not automatically identify a damaged disc.
Match approved size, load and speed requirements. Different front and rear sizes can rule out ordinary rotation. Track tyres, wear or wheel damage need their own assessment. Alignment follows repair of worn components.
Report a knock, harsh ride, height change or lift warning. Check fitted dampers, hydraulic equipment, sensors and related connections where applicable. The repair differs across McLaren generations.
Reduced braking, unsafe steering or a serious chassis warning needs safe transport. Lifting and supporting the vehicle must follow the model’s approved points and procedures.
Describe when the problem appears and any recent battery, glass or electrical work. We confirm the checks supported for your car.
Check refrigerant loss, compressor operation and temperature control. A recharge does not repair an unresolved leak.
Check the filter, blower and air distribution for the fitted system before choosing a replacement.
Report the affected function and whether it is intermittent. Supply, wiring, software and component faults require different checks.
Battery chemistry and compatible charging equipment matter. Confirm the handbook requirements before connecting a charger or arranging battery work. Module replacement, coding and software functions depend on supported access. Keep existing keys available for an immobiliser or key enquiry.
Identify the exact hybrid model when booking. Procedures for Artura should not be applied automatically to a different McLaren hybrid.
Artura combines a petrol engine with an electric drive. Engine care, friction brakes and tyres remain relevant. A low-voltage battery problem and a high-voltage warning are different enquiries.
Share the warning, charging behaviour and changes in driving. We confirm supported testing, safety procedures, parts access and any specialist or manufacturer involvement before accepting high-voltage work.
Do not open high-voltage equipment or touch exposed orange cables. Follow the displayed instructions and handbook after a serious warning. P1, Speedtail and other limited-production hybrid work requires individual confirmation. Manufacturer warranty or campaign eligibility belongs with McLaren for the actual VIN and market.
The complete quote should explain what will be repaired, which parts are needed and what requires specialist or manufacturer support.
Send photographs of panels, glass or trim. Inspection distinguishes surface damage from concealed mounts, safety systems or structural involvement.
Carbon structure and damaged composite components need the applicable repair procedure and specialist suitability established. Panel work and paint refinishing are separate from a structural repair.
Match the VIN, body style and fitted equipment. Confirm sourcing time, parts condition, paint work and necessary setup. Insurance reporting, policy terms and authorisation affect the agreed job.
A photo estimate can change after concealed damage is inspected. For damage-led enquiries, the McLaren collision repair page is the separate service destination. Polishing or paint protection cannot correct weakened structure or a damaged safety component.
Review the fitted quote, parts availability and expected timing before approval. Workshop time and delivery time are confirmed separately. Additional findings need your agreement before extending the job.
A McLaren service needs a model-specific quote for the scheduled work, oil specification, filters and inspections. The price section includes an attributed Dubai market comparison, not a fixed offer from this workshop. Repairs and additional investigation are quoted separately.
This page is for independent workshop enquiries. Manufacturer warranty claims, campaigns and restricted software functions may require an authorised McLaren retailer. Confirm the available work before arranging a visit.
Identify the fitted brakes first. Assessment and replacement decisions must follow the applicable manufacturer condition limits. We confirm the supported procedure and parts before accepting the work. Generic steel-disc measurements and prices should not be applied automatically.
Tell us the exact model and concern. Routine maintenance and high-voltage work have different requirements. Supported diagnostics, equipment, procedures and any specialist involvement are confirmed before major hybrid work is accepted.
Not necessarily. A warning, slipping or poor engagement needs assessment. Fluid maintenance cannot repair a confirmed clutch, control or mechanical fault. The quote identifies the affected system and the final checks required.
The team confirms time after the job and parts availability are known. Routine service, diagnosis, structural work and major repairs have different schedules. A parts delay is separate from workshop labour time.
Ask when arranging the assessment. Transport must suit the model, clearance and condition, including any lift-system problem. Location, loading method and the charge are confirmed before collection. Do not drive through a serious braking, oil-pressure or temperature warning.
Tell us your McLaren model and what needs attention. We will confirm the available work, help arrange an assessment and explain the quotation before repairs begin.
