Oil and filter service
AED 200–350 for many fills up to 5 liters, or AED 350–600 for higher capacity or specialist requirements. Oil, filter, labor and checks are included. The correct product and classic-engine suitability are confirmed.
Keep your Triumph ready for its next drive. Discuss servicing, engine and cooling repairs, brakes, electrics, bodywork and interior repairs at our independent Al Quoz garage.
Whether your car runs regularly or has been parked for years, start with its model and the work you need. We assess the condition, explain the parts options and provide a written estimate.

This page covers classic Triumph cars including TR roadsters, Spitfire, GT6, Stag and Triumph sedans. Contact us for routine care, a repair or a stored-car assessment. It concerns cars rather than modern Triumph motorcycles.
Oil, filters, fluid condition and maintenance checks for a running car. A stored car also needs its fuel, braking and starting systems assessed.
Engine, cooling, clutch, gearbox, brakes, steering, suspension, battery, charging and wiring concerns.
Paint, panels, corrosion assessment, seats, carpets and trim. Wider restoration and specialist component work are confirmed after assessment.
Inquiries are welcome for another classic Triumph or a converted car. Tell us the model and the repair you want to discuss. We explain any specialist component work after assessment.
Compare the included work as well as the amount. A service, a local repair and rebuilding an assembly have different costs.
AED 200–350 for many fills up to 5 liters, or AED 350–600 for higher capacity or specialist requirements. Oil, filter, labor and checks are included. The correct product and classic-engine suitability are confirmed.
Specified fluid, replacement and bleeding. Leaking cylinders, damaged hoses and other hydraulic repairs are separate. Identify the fluid already used, particularly on a restored car.
Suitable repair parts and labor, with bleeding where the circuit is opened. A damaged or incompatible caliper may need replacement. Rear drum-brake repairs are a different job.
A replacement fabric panel. Vinyl, leather, seat foam, frames and a complete retrim have separate quotations. Classic pattern matching and material availability can change the price.
These are our published general workshop estimates, not a fixed Triumph tariff. They describe specific jobs rather than the cost of a full restoration. Parts availability and the car’s existing modifications are checked before a written total is agreed.
The initial visual assessment is free. Our published targeted diagnostic-testing estimate is AED 150–350 including 5% VAT. Additional testing or dismantling is agreed separately. Most original classic Triumph systems need physical tests, not a modern computer scan.
A stored Triumph is assessed before a complete recommissioning total can be set. Start with the free visual assessment. Agreed targeted testing is guided at AED 150–350 including 5% VAT. The quote then separates a controlled restart, fuel and cooling repairs, brake and clutch hydraulics, tires and the checks needed before a road test.
An oil and filter service at AED 200–600 is one possible item, not a complete recommissioning package. One serviceable caliper repair at AED 400–1,000 is separate from other hydraulic components. Cooling hoses, pumps, ignition parts, machining and corrosion repairs are priced for the findings and fitted equipment.
These estimated repairs illustrate the stated work and assumptions. They are not completed customer jobs. Both totals include 5% VAT and the listed parts and labor.
Typical job estimate of AED 350–600
A compatible filter, suitable oil for the fitted classic engine, normal drain and refill work and final level and leak checks. This uses the higher-capacity service guide. An engine conversion or a different filter arrangement can change the product and access work.
The estimate does not include diagnosing low oil pressure, repairing a leak or replacing ignition and fuel-system parts. A running concern is assessed separately from routine oil maintenance.
Typical job estimate of AED 400–1,000
One serviceable front caliper repaired with compatible parts, refitted and bled where the hydraulic circuit is opened. The correct existing fluid type must be established. The other caliper, brake pads and discs are inspected but replacement is additional.
A damaged bore, unsuitable casting or unavailable repair kit may make a correctly matched replacement more sensible. Final checks cover leakage, pedal operation and the original braking concern before handover.
Start with the car’s condition. A routine service has a defined list of items. A car that has stood unused needs staged checks before it is driven.
Use the handbook for the fitted engine. Time, storage and condition matter alongside mileage. An oil-pressure complaint needs investigation, not just fresh oil.
Tell us how long the car has stood and when it last ran. A stored-car assessment is broader than an oil service.
Starting trouble, temperature changes and oil concerns need different checks. The diagnosis determines whether a local repair or internal engine work is appropriate.

Identify the carburetors and ignition setup. Mixture, balance, fuel supply and wear are assessed together. Mixture adjustment cannot resolve every running fault.
TR5 and some TR6 specifications use Lucas mechanical injection. Pump, metering-unit and injector faults need different tests from carburetor faults. A specialist repair or exchange component can be discussed when the diagnosis supports it.
Stop safely, switch off and call before driving further. Do not attempt a roadside fuel-system repair or open a hot cooling system.
Compare like-for-like work before approving a repair. A clutch fault, an overdrive control problem and an internal gearbox rebuild are different jobs.
| Compare the work | Manual gearbox | Manual with overdrive | Automatic gearbox |
|---|---|---|---|
| What you notice | Difficult gear changes, slipping, noise or leakage. | Overdrive fails to engage, drops out or works intermittently. | Delayed engagement, poor shifts, noise or leakage. |
| First checks | Clutch hydraulics, release operation, linkage, leaks and gearbox condition. | Identify the overdrive unit. Check its controls, wiring and oil condition. | Identify the fitted transmission. Assess fluid condition, leaks, controls and operation. |
| Repair options | A hydraulic repair differs from clutch removal or a gearbox rebuild. | An external control fault differs from internal overdrive work. Specialist repair may be needed. | A local leak or control repair differs from internal rebuilding. Confirm the repair arrangements. |
| Useful follow-up details | Describe the change. Gearbox identification can be supplied later. | When overdrive fails. Unit details help if available. | Whether the complaint occurs cold, warm or under load. |
Find the concern that describes your car. The checks and quotation should name the actual system and components involved.
What is assessedHoses, cylinders, calipers, the master cylinder and fluid leakage. Identify the fluid already used on a restored car.
What changes the quoteA fluid service is separate from repairing a leak or replacing a damaged component.
What is assessedFitted discs, pads, drums and shoes, together with wheel condition and operation.
What changes the quoteFront-disc repair and rear-drum work use different parts. Agree which axle or components are included.
What is assessedPlay, bushes, joints, springs, dampers, wheel bearings and tire condition, age and specification.
What changes the quoteModel, suspension conversions and wire wheels affect compatibility. Repair worn parts before finishing with alignment.
If the pedal sinks, a wheel is smoking or fluid is leaking, do not drive the car to test it. Call to discuss safe transport.
Battery, charging, ignition and wiring checks follow the car’s actual equipment and previous changes. Describe what stopped working and when it happens.
A flat battery can reflect its condition, charging performance, poor connections or a parked drain. We assess the complaint before choosing a battery, starter or alternator repair. Mention generator-to-alternator conversions and changes to electrical polarity.
Distributor components, ignition coils, ground connections, wiring and switches can affect running or lighting. A modern scanner is not a substitute for checking an original classic circuit. An electronic-ignition conversion needs its own component identification.
Previous repairs, alarms, stereos and auxiliary fans can leave poorly connected wiring. Explain which items were added and when the fault began. Loom replacement or larger rewiring is assessed and quoted separately.
Tell us whether the car has original ventilation or added AC. Heater leaks, blower problems and an AC cooling fault are separate repairs. Refrigerant, compressor and fitted components are identified before quoting.
The condition of the metal decides the starting point. Find the repair level that fits your car before choosing the finish.
Paint is tired or there is local panel damage.
Panel repair, preparation, color matching and refinishing. Existing paint affects the finish that can be achieved.
Corrosion is visible, or past work needs checking.
Inspect sills, floors, arches, mounting areas and relevant chassis sections. Paint or undercoating cannot replace weakened metal.
The project may involve dismantling or major metal work.
Agree the intended result, fabrication and repair arrangements before committing to a wider project.

A damaged panel, worn foam, leaking hood or complete retrim needs a different estimate. Tell us the area you want repaired and the finish you prefer.
A local cover repair may preserve sound original material. Foam, frames, moisture beneath carpets and a complete retrim are separate work. Agree vinyl, fabric or leather, color, grain and stitching before starting.

Use the included work and parts choices to compare a local repair with a wider project. Agree what to preserve and what to replace.
Imported parts, exchange units, core returns and machining can affect completion. A routine service and a rebuild have different booking needs. Rimmer Bros’ TR6 identification guidance explains why component numbers matter when ordering.
Visit 39, Al Quoz Industrial Area 4, Dubai. Pickup and drop-off can be arranged depending on location and availability. Mention whether the car starts, rolls and brakes, plus low clearance or long storage, so suitable transport can be discussed.
An original component may be worth repairing when its condition supports the work and suitable repair parts exist. Reproduction parts can be useful for unavailable or unsafe originals. An exchange or reconditioned assembly needs its condition, compatibility and coverage stated. Cosmetic originality should not override safe brakes, steering or fuel containment.
The estimate explains freight, any exchange-core deposit, machining and specialist charges when applicable. An exchange deposit can depend on the condition and return of the original unit. Supplier stock and overseas delivery affect timing. Agree whether the car can be collected while a part is sourced or must remain at the workshop.
Cooling work needs leak and temperature checks. Fuel and ignition repairs need the starting or running concern reassessed. Brake and clutch work needs hydraulic operation and leakage checked. Wiring work needs the affected circuit retested. Corrosion repairs and trim work need the agreed finish, fit and disturbed functions reviewed.
A controlled road test follows the appropriate safety checks. Keep the invoice, fitted-part details and any remaining findings. A stored car may need further staged work even after its engine starts and the first repair is complete.
Call with your model and the work you need. An engine-bay photo and a short description of the symptoms are useful when discussing a classic car.
My Car Repair Dubai is an independent, multi-brand garage operated by AMF AUTO SERVICES LLC. This page concerns classic Triumph cars. It does not imply manufacturer authorization or factory support for every specialist component.
Arrange a classic-car pre-purchase inspection covering the agreed accessible structure, corrosion, engine, transmission, brakes and electrics. Previous modifications are also considered. Hidden panels and internal assemblies may need separately agreed dismantling. The report describes findings rather than guaranteeing future reliability.
No. The free initial visual assessment is separate from agreed diagnostic testing, compression checks, dismantling or a detailed restoration assessment. We explain the required checks and any charge before starting.
Yes, contact us about your modified Triumph. Engine swaps, electronic ignition and changed brakes or suspension affect replacement parts. We inspect the fitted equipment and explain suitable repairs or any specialist support. Technical records and photos can be supplied later if available.
Follow the handbook for the fitted engine and use a plan that reflects mileage, time, storage and condition. Avoid applying one modern-car mileage interval to every classic. Tell us when the fluids and filters were last changed and how you use the car.
Call or WhatsApp your Triumph model and the work you need. Mention whether it runs or has been in storage. We will help arrange the assessment. Technical details and photographs are optional follow-up information.
My Car Repair Dubai is operated by AMF Auto Services LLC at Warehouse 39, Al Quoz Industrial Area 4, Dubai. View the workshop contact details.
Photos of the car, fitted engine and affected area help with the discussion. The assessment, parts availability and quotation are confirmed before you approve work.