Mahindra servicing and repairs for Scorpio Pik Up and XUV500 owners in Al Quoz. Arrange oil and filter changes, diesel engine repairs, clutch and gearbox work, brakes, AC or body repairs. We explain the work and parts choices before you approve the quote.
Start with your model and the job you need. A work pickup and a family SUV can require different fluids, brakes and driveline parts.
Service and repairs for single- and double-cab pickups, including the 2.2-litre mHawk turbo-diesel. Manual and automatic versions, and two- or four-wheel drive, need the correct parts for their build.
Planned servicing and repairs for the fitted petrol or diesel engine, manual or automatic gearbox, and front- or all-wheel-drive equipment. The model name alone does not identify the oil, transmission fluid or parts needed.
Enquiries for Scorpio SUVs, Thar, Bolero and imported models are welcome. Tell us the model and requested work so we can confirm parts and testing support. For an electric Mahindra, discuss the exact job before arranging specialist battery or high-voltage work.
Use these published workshop ranges to plan the visit. Your engine, brake size, supplied parts and agreed work determine the Mahindra quote.
| Work | General estimate | Included work |
|---|---|---|
| Oil and filter service | AED 350–6006–8 litre fill guide | Specified oil, compatible filter, fitting and completion checks. Larger fills, specialist oil and extra service items are quoted separately. |
| Standard brake pads | AED 250–500per axle, fitted | Suitable front or rear pad set and fitting. Confirm the brake arrangement. Drums, shoes, discs and additional hardware need their own quote. |
| Pads and discs together | AED 650–2,500per axle, fitted | Two discs, one pad set and fitting on one axle. Premium components or a different brake size can cost more. |
| Four-wheel alignment | AED 200–350per vehicle | Measurements and permitted adjustments. Tyres, balancing, worn joints and extra repair or calibration work are separate. |
| Scan and targeted diagnosis | AED 150–350initial agreed checks | Relevant fault information and agreed checks. Extended investigation or dismantling is quoted before it proceeds. |
Table figures include 5% VAT. These are general workshop guides, not fixed tariffs for every Mahindra. The initial visual assessment is free. Diagnostic testing is separate. Clutch, turbo, gearbox, suspension and body repairs are quoted after the relevant checks.
Ask for the complete fitted total, including fluids and any required setup, so you can compare like-for-like work.
An oil change, a scheduled service and work-use checks have different inclusions. Select the type of visit to see what belongs in it.
The quotation identifies the oil specification, fill quantity and filter. Petrol and diesel XUV500 versions do not automatically share a service requirement. A Pik Up used for work may also need filter and fluid checks beyond a basic oil change.
The oil and filter service page explains what a basic oil change includes. Additional maintenance belongs in the quote before fitting.
We use the handbook and service record for the year, engine and original market. Time limits matter as well as mileage. There is no single interval that covers every Mahindra, and a service reminder does not list every due item.
Bring previous invoices if available. They help distinguish overdue work from a part that has already been replaced.
Frequent loading, dusty sites, off-road work and long periods of idling can change maintenance needs. We discuss the actual use and the applicable severe-use guidance rather than automatically replacing every filter at each visit.
For a working pickup, share the days it can be released. We can discuss staged visits and parts availability before agreeing a repair date.
Start with what changed. The checks distinguish a serviceable fault from internal damage before you choose the repair.
Stop safely for oil-pressure warnings, severe overheating, fuel leaks or a loud mechanical knock. Ask about recovery before driving further.
Select the work around the fitted transmission. Slipping, difficult gears and a four-wheel-drive complaint need different checks.
Check clutch operation, hydraulics, linkage and mounts. The quote identifies the clutch kit and any agreed flywheel, release mechanism or leak repair.
Replacing the clutch does not resolve every shifting fault.
Confirm the gearbox, fluid, leaks and relevant fault information. Compare maintenance, a targeted repair and internal work after assessment.
A fluid change is not a guaranteed cure for slipping.
Tell us whether the vibration changes with speed or load. It may come from the driveline rather than the engine.
A braking change, a clunk and uneven tyre wear point to different work. We inspect the vehicle with its loading and modifications in mind.
Brake wear is measured before choosing pads, discs or drum work.
Mention lift kits, larger wheels and heavy loads before the quote. We explain achievable alignment settings and any separate repair needed.
Cabin comfort and reliable starting belong in the same visit when needed. Describe the failed function so the quote covers the right checks.
Warm air, weak airflow and uneven vent temperatures can have different causes. We check the complaint before recommending a recharge.
Refrigerant work uses the specified type and quantity. An ongoing leak, failed compressor, blocked airflow or temperature-control fault requires its own repair. The estimate separates refrigerant, replacement parts and labour.
Tell us if cooling changes at idle, if the fan speed is weak, or if there is a smell or water in the cabin. The cabin filter, blower, drainage and air distribution may need attention instead of adding more gas.
Choose the result you need, then agree the repair and supplied parts. Photos help the first discussion; hidden damage may need inspection.
Compare genuine or suitable alternatives, availability and applicable warranty terms. Imported or older models may need further details to identify the right part.
For a major assembly, confirm new, used or rebuilt condition, included components, fitting, fluids and required setup. Availability affects completion.
Call or WhatsApp with your model and the work or problem. You do not need to identify a failed part before contacting us. We help arrange the assessment and collect any further details needed for parts or a procedure.
After assessment, the quote explains the findings, supplied parts, labour and fitted total. Repairs begin after approval. Additional work needs agreement, and availability affects the completion date.
Share the number of vehicles, models, due work and days they can be released. We can discuss appointments, separate estimates and work records. If a truck is immobilised, explain its location and loading so suitable recovery can be arranged.
Pickup and drop-off can be requested by arrangement. Availability and any charge are confirmed when booking.
A few practical answers on cost, vehicle support and arranging the work.
The general oil and filter guide is AED 350–600 for 6–8 litre fills. The exact oil, filter and quantity determine the quote. A scheduled service costs more when additional filters, fluids or other items are due.
Yes, enquiries for service and repairs on these models are welcome. Tell us the model and requested work. We confirm its engine, gearbox and fitted equipment when needed for parts and the repair procedure.
Yes. Describe when the loss happens, any smoke and the warning message. Checks can consider fuel delivery, intake and boost leaks, sensors and engine condition. Further testing is agreed before major components are replaced.
We assess the fitted transmission and complaint before quoting. Manual clutch work, automatic fluid service and internal gearbox repairs have different inclusions. A fluid change is not a guaranteed fix for slipping.
No single interval applies to every year, engine and market. Follow the appropriate maintenance schedule, including time limits and work-use requirements. Previous records help identify what is due.
Contact us with the model and exact work. Parts, software access and specialist testing support need confirmation. Electric battery and high-voltage enquiries require a job-specific discussion before booking.
Timing depends on the confirmed fault, parts availability and any machining or specialist procedure. We discuss the expected completion after assessment rather than promise the same turnaround for every job.
Contact us with the vehicle, location and whether it can move safely. Suitable recovery or collection can be discussed. Availability and any charge are confirmed before arrangements are agreed.
Call with your Mahindra model and the work you need. We will help arrange a service visit, an assessment or a repair quote.
Call 050 608 7150 or send the vehicle details on WhatsApp.
